2023年5月，有MAX飞机反应MAINT灯亮。
状态信息1为SPOILER CONTROL CHANNEL ，相应维护信息为27-01330 GROUND SPOILER OUTPUT DRIVER SIGNAL IS OUT OF RANGE Detected by: SPOILER CONTROL ELECTRONICS (SCE)；
状态信息2为GROUND SPOILER CONTROL，相应维护信息为27-01220 GROUND SPOILER CONTROL MODULE IS NOT IN COMMANDED POSITION Detected by: SPOILER CONTROL ELECTRONICS (SCE)。
复位P18-1 B4 和P6-1 A16跳开关故障依旧，整机断电后重新上电，故障依旧，27 – Spoiler Control, SYSTEM TEST, Ground Spoilers测试时发现地面扰流板升不起来，27 – Spoiler Control, OPERATIONAL TEST, SCE Test测试通过。
27-01330 GROUND SPOILER OUTPUT DRIVER SIGNAL IS OUT OF RANGEDetected by: SPOILER CONTROL ELECTRONICS (SCE)的可能性故障部件为：
(a)The ground spoiler control module, M2988.
(b)The ground spoiler control relay, R1169.
(c)The spoiler control electronics, M2940
(d)The problem with the wiring.
27-01220 GROUND SPOILER CONTROL MODULE IS NOT IN COMMANDED POSITION Detected by: SPOILER CONTROL ELECTRONICS (SCE)的可能性故障部件为：
(a)The ground spoiler control relay, R1169.
(b)The spoiler control electronics, M2940
(c)The ground spoiler control module, M2988.
(d)The problem with the wiring.
从故障信息看，SCE取的是GSCM的预位和控制电磁线圈的电流值，用于监控是否在可控范围。当不在范围时，就给出相关警告。从排故结果看，是R1169故障导致的。符合IFIM中关于27-01220的故障可能排序。SCE自检测试能通过，也表明SCE是没有问题的。关于GSCM内部液路作动原理课参看另外一篇关于扰流板无法收回的说明。
截止2023年6月，波音全球的统计数据如下
| RECOMMENDATION: 27-02790 SPOILER FAULT OUTPUT DRIVER SIGNAL IS OUT OF RANGE: Operators have reported SPOILER CONTROL CHANNEL status messages. Boeing finds these messages may occur during power up, often with maintenance message 27-02790. To minimize the chance of dispatch delay, Boeing recommends to perform the following FIM based maintenance checks for occurrence of SPOILER CONTROL CHANNEL status message with MMsg 27-02790 (SPOILER FAULT OUTPUT DRIVER SIGNAL IS OUT OF RANGE): – Use the OMF to perform the ground test 27 – Spoiler Control OPERATIONAL TEST, SCE Test. -Refer to AMM Task 27-61-45-730-801 – Spoiler Control Electronics Self – Test. -Note that the SCE ground test requires the Master Dim and Test (MD&T) be in the bright (BRT) position. -Confirm the MMsg 27-02790 is cleared by the Ops Test. -If cleared, the system is OK for dispatch. -If the fault is still active, use FIM Task 27-61-00-810-922 to troubleshoot and diagnose the issue. MEL dispatch relief is available for SPOILER CONTROL CHANNEL. MEL 27-61-01-01 should be reviewed for applicability. |
| MITIGATION: 27-02790 SPOILER FAULT OUTPUT DRIVER SIGNAL IS OUT OF RANGE: Boeing and the SCE supplier (BAE) are investigating the root cause of this message and assessing the appropriate Spoiler Control Electronics software change(s) to appropriately address these faults. |
